Linksys RT41-BU Page 12 User Manual Download

Page: 12 / 71

Chapter 3: Getting to Know the Router
The Back Panel

Wired Broadband Router

Chapter 3: Getting to Know the Router

The Back Panel

The Router’s ports and the Reset button are located on the back panel of the Router.

Internet

This

Internet

port connects to your cable or DSL modem.

Ethernet 1-4

These four

Ethernet

ports connect to network devices, such as PCs, print servers, or

additional switches.

Reset Button

There are two ways to reset the Router to its factory default settings. Either press the

Reset

button for approximately five seconds, or restore the defaults from the Administration tab -
Factory Defaults of the Router's Web-based Utility.

Power

The

Power

port is where you will connect the power adapter.

Figure 3-1: Back Panel

NOTE:

If you use the Reset button, the Router’s

settings will be reset to their factory defaults.

Summary of Contents for RT41-BU








































































Search results

Summary of Contents for RT41-BU

Reviews:

Related manuals for RT41-BU

Brands by name

Popular brands

Linksys RT41-BU, User Manual

Search results

Summary of Contents for RT41-BU

Reviews:

Related manuals for RT41-BU

Brands by name

Popular brands