2
Chapter 3: Getting to Know the Adapter
The Bottom Panel
PowerLine AV Ethernet Adapter
Chapter 3: Getting to Know the Adapter
The Bottom Panel
The Ethernet port is located on the bottom panel of the Adapter.
Ethernet
Port
The
Ethernet
port connects to an Ethernet network cable. The other end of the cable will
connect to your computer or other Ethernet-enabled network device.
The Back Panel
The power plug and Device Password are located on the back panel of the Adapter.
Power Plug
The power plug connects to an electrical outlet in your location.
Device
Password
The
Device Password
is located on the sticker. If you are adding this Adapter to a pre-existing
powerline network with your own Network Password (not the default), then you may need to
enter the Device Password on the Security tab of the Configuration Utility. For more
information, refer to “Chapter 5: Using the Configuration Utility.”
Figure 3-1: Bottom Panel
Figure 3-2: Back Panel
IMPORTANT:
Because the Adapter sends data over the powerlines of your residence, Linksys
recommends that you plug the Adapter directly into an electrical outlet. The Adapter has its own
power filter for protection against surges.
Summary of Contents for PLE200 - PowerLine AV EN Adapter Bridge
Page 1: ...Model No WIRED PLE200 User Guide Ethernet Adapter PowerLine AV ...
Page 30: ...24 Appendix E Regulatory Information PowerLine AV Ethernet Adapter ...
Page 31: ...25 Appendix E Regulatory Information PowerLine AV Ethernet Adapter ...
Page 32: ...26 Appendix E Regulatory Information PowerLine AV Ethernet Adapter ...
