manualshive.com logo in svg

Linksys PLE200 - PowerLine AV EN Adapter Bridge, User Manual

Share
Download
Linksys PLE200 - PowerLine AV EN Adapter Bridge User Manual Download Page 19

13

Chapter 5: Using the Configuration Utility
Upgrade

PowerLine AV Ethernet Adapter

Upgrade

Use this screen to upgrade the connected Adapter’s firmware.

Status. Displayed here is the MAC address of the Adapter currently accessed by your computer.

Device Information

MAC Address. Displayed here is the MAC address of the Adapter.

Firmware Version. Displayed here is the firmware version of the Adapter.

Device Upgrade

To upgrade the Adapter’s firmware, follow these instructions:

1. Download the Adapter’s firmware from the Linksys website at www.linksys.com.

2. Extract the firmware file on your computer.

3. Enter the location of the firmware’s file, or click the 

Browse

 button to find the file.

4. Click the 

Upgrade 

button, and follow the on-screen instructions.

To exit the Configuration Utility, click 

Exit

.

About

The 

About

 screen displays information about the connected Adapter and a link to the Linksys website, 

www.linksys.com.

Status. Displayed here is the MAC address of the Adapter currently accessed by your computer.

Ver. Displayed here is the version number of the Configuration Utility.

Click the 

WWW.LINKSYS.COM

 button to visit the Linksys website, www.linksys.com. (You must have an active 

Internet connection to use this link.)

Figure 5-6: Upgrade Screen

Figure 5-7: About Screen

Summary of Contents for PLE200 - PowerLine AV EN Adapter Bridge



































Reviews:

No comments

Brands by name

Popular brands

Load more brands