![background image](http://html.mh-extra.com/html/linksys/pap2-t/pap2-t_user-manual_1923870007.webp)
Internet Phone Adapter with 2 Ports for Voice-over-IP
3
Chapter 2: Getting to Know the Phone Adapter
Back Panel Ports
Chapter 2: Getting to Know the Phone Adapter
Back Panel Ports
The Phone Adapter’s ports are located on the back panel.
PHONE 1
Port
For your primary Internet phone line, the
PHONE 1
port allows you to connect your
telephone to the Phone Adapter using an RJ-11 telephone cable (not included).
PHONE 2
Port
If you add a second Internet phone line, then use the
PHONE 2
port. It allows you to connect
a second telephone (or fax machine) to the Phone Adapter using an RJ-11 telephone cable
(not included).
ETHERNET
Port
The
ETHERNET
port allows you to connect the Phone Adapter to your router or gateway
using a Category 5 (or better) Ethernet network cable.
POWER
Port
The
POWER
port is where you will connect the included power adapter.
NOTE:
The Phone ports do not carry any voltage.
Figure 2-1: Back Panel