manualshive.com logo in svg

Linksys PAP2-T, User Manual

Share
Download
Linksys PAP2-T User Manual Download Page 16

Internet Phone Adapter with 2 Ports for Voice-over-IP

12

Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu

Using the Interactive Voice Response Menu

Set Network Mask (or Subnet 
Mask)

121

Enter the network mask using 
numbers on your telephone 
keypad. Use the 
* (star) key to enter a decimal 
point.

To set the network mask, the DHCP feature must 
be disabled. If the DHCP feature is enabled, you 
will hear, “Invalid Option,” if you try to set the 
network mask.

Check Static Gateway IP Address

130

—

Use this command to check the current gateway IP 
address of the Phone Adapter.

Set Static Gateway IP Address

131

Enter the IP address using 
numbers on your telephone 
keypad. Use the 
* (star) key to enter a decimal 
point.

To set a static gateway IP address, the DHCP 
feature must be disabled. If the DHCP feature is 
enabled, you will hear, “Invalid Option,” if you try to 
set a static gateway IP address.

Check MAC Address

140

—

Use this command to check the current MAC 
address of the Phone Adapter in hexadecimal 
string format.

Check Firmware Version

150

—

Use this command to check the current version 
number of the firmware currently installed on the 
Phone Adapter.

Interactive Voice Response Menu

Action

Command (press these 
keys on the telephone)

Choices

Description

Summary of Contents for PAP2-T




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands