manualshive.com logo in svg

Linksys PAP2-T, User Manual

Share
Download
Linksys PAP2-T User Manual Download Page 14

Internet Phone Adapter with 2 Ports for Voice-over-IP

10

Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu

Using the Interactive Voice Response Menu

Using the Interactive Voice Response Menu

When entering values, such as an IP address, you may exit without saving your changes by press the * (star) key 
twice within half a second. Otherwise, the * (star) key will be treated as a decimal point or dot.

After entering a value, such as an IP address, press the # (pound) key to indicate you have finished your 
selection. To save the new setting, press the 

1

 key. To review the new setting, press the 

2

 key. To re-enter the 

new setting, press the 

3

 key. To cancel your entry and return to the main menu, press the 

*

 (star) key.

For example, to enter the IP address 191.168.1.105 using your telephone’s keypad, press: 

191*168*1*105

. 

When you are finished, press the 

#

 (pound) key, then press the 

1

 key to save the IP address. To cancel your entry 

and return to the main menu, press the 

*

 (star) key.

If the menu is inactive for more than one minute, the Phone Adapter will automatically exit the Interactive Voice 
Response Menu. To re-enter the menu, press the * (star) key four times.

The settings you have saved will take effect when you hang up the telephone. The Phone Adapter 
may reboot at this time.

Interactive Voice Response Menu

Action

Command (press these 
keys on the telephone)

Choices

Description

Enter Interactive Voice Response 
Menu

****

—

Use this command to enter the Interactive Voice 
Response Menu. 
Do not press any other keys until you hear, 
“Configuration menu. Please enter option followed 
by the # (pound) key or hang up to exit.”

Summary of Contents for PAP2-T




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands