PRODUCT DATA
BUSINESS SERIES
Features
1310 nm Fabry-Perot
transmitter
Built-in spring latch for easy
module removal
Low insertion-loss duplex LC
receptacle
Low Electromagnetic
Interference (FCC Part 15,
Class B)
Meets FDA and IEC eye
safety standards
Compatible with SFP MSA
•
•
•
•
•
•
100BASE-LX MiniGBIC SFP Transceiver
Specifications
Model
MFELX1
Standards
SFP MSA, ITU-T G.957 and G.958, FDA 21CFR 1040.10,11
and IEC 60825-1,2
Connector Type
Duplex LC
Wavelength Typical (Tx)
1310 nm
Wavelength Range (Tx)
1261 nm (min) to 1360 nm (max)
Wavelength Range (Rx)
1260 nm (min) to 1580 nm (max)
Performance
Average Output Power
-15 dBm (min), -8 dBm (max)
Extinction Ratio (Tx)
8.2 dB (min)
Receiver Sensitivity
-34 dBm (min)
Receiver Overload
-5 dBm (max)
Environmental
Dimensions
0.53" x 0.33" x 2.19"
W x H x D
(13 x 9 x 56 mm)
Unit Weight
0.63 oz. (0.018 kg)
Power
1W (max)
Certification
FCC Part15 Class B, UL, cUL, ICES-003, CB
Operating Temp.
32 to 158ºF (0 to 70ºC)
Storage Temp.
-40 to 185ºF (-40 to 85ºC)
Operating Humidity
10% to 85% noncondensing
Storage Humidity
5% to 90% noncondensing
Package Contents
100BASE-LX miniGBIC SFP Transceiver
Quick Installation Guide
Minimum Requirements
Switch with miniGBIC port
•
•
•
Check the product package and contents for specific features supported. Specifications are subject to change without notice. Linksys is a registered trademark or
trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and
product names are trademarks or registered trademarks of their respective holders.
Model:
MFELX1
6111010NC-RR
Linksys
A Division of Cisco Systems, Inc.
121 Theory
Irvine, CA 92617 USA
E-mail: [email protected]
Web: http://www.linksys.com
Linksys products are available in more
than 50 countries, supported by
12 Linksys Regional Offices throughout
the world. For a complete list of local
Linksys Sales and Technical Support
contacts, visit our Worldwide Web Site
at www.linksys.com.
