Linksys LAPAC1750 User Manual Download Page 81

Page: 81 / 125

System Summary

Device SKU

The SKU is often used to identify device model number
and region.

Firmware Version

The version of the firmware currently installed.

Firmware
Checksum

The checksum of the firmware running in the access
point.

Hardware Version

The version of the hardware.

Local MAC
Address

The MAC (physical) address of the wireless access
point.

Serial Number

The serial number of the device.

Host Name

The host name assigned to the access point.

System Up Time

How long the system has been running since the last
restart or reboot.

System Time

The current date and time.

Power Source

The power source of the access point. It can be Power
over Ethernet (PoE) or Power Adapter. When two power
sources are plugged in, Power Adaptor will be
displayed.

Buttons

Refresh

Click to update the data on the screen.

LAN Status

Go to System Status > Status > LAN Status to see settings and status of LAN interface.

Summary of Contents for LAPAC1750






























































































































Search results

Summary of Contents for LAPAC1750

Reviews:

Related manuals for LAPAC1750

Brands by name

Popular brands

Linksys LAPAC1750, User Manual

Search results

Summary of Contents for LAPAC1750

Reviews:

Related manuals for LAPAC1750

Brands by name

Popular brands