Linksys HomeLink HPN100, User Manual

Page: 36 / 66

Windows 95
17. You will be asked to select installation direc-
tory. The default directory is
c:\program files\wingate. We suggest that you
leave it there. If you decide to put it somewhere
else on your hard disk, make a note of it. Click
Next.
18. At the next screen, click Next to continue.
You will see a screen prompting you to give the
name of your computer. Be sure that the name is
the same as the one you gave in step 7 and click
Next.
19. WinGate Home will ask you if you are
installing your first computer on the network or
if you are adding a PC to an existing network.
Select the correct statement and click Next.
The Wizard will take a few seconds to check the
system, then it will reboot the computer.
20. After the reboot, the Wizard will go through
the network detection process for a few seconds.
21. WinGate Home will show you a diagram of
your network and it will run some performance
tests on your HomeLink card. Read the instruc-
tions on the screen and click Next.
22. Next, you will be asked to select either the
Typical or Custom installation of the WinGate
Home software. It is recommended that you
select Typical. Click Next.
32