Using the Command Line Interface
The EtherFast 10/100 4-Port Analog Router can be
configured via a null modem serial connection and a
PC running a terminal program.
The router is then instructed through a command line
interface instead of the Web interface. In order to
obtain documents on how to set up and use the com-
mand line interface, go to the Linksys web site at
http://www.linksys.com
Please note that Linksys only provides limited techni-
cal support for the command line itnerface of the
EtherFast 10/100 4-Port Analog Router.
29
router.qxd 12/16/99 12:24 PM Page 35