4
Reset Button
If the Instant GigaDrive’s IP Address or pass-
word is lost, press and release this button. The
GigaDrive will beep once to indicate that a new
IP Address (192.168.0.2, with a Network Mask
of 255.255.255.0) has
been provided. This
function will also
clear the GigaDrive’s
passwords and rights.
Upli
n
k
Button
This button toggles the
GigaDrive’s Ethernet
Connector between an Uplink setting and a
standard setting. If the GigaDrive is connected
directly to a PC without a hub, then this button
should be up. If connecting to a hub or switch,
depress this button.
10/100
B
a
se
TX
c
onne
c
to
r
Use this port to connect the Instant GigaDrive
to your 10BaseT or 100BaseTX hub.
100
B
a
se
TX
LED
i
n
d
i
ca
to
r
This
LED will glow amber if the
10/100BaseTX connector is using 100BaseTX.
10
B
a
se
T
LED
i
n
d
i
ca
to
r
This
LED will glow green if the 10/100BaseTX
connector is using 10BaseT.
Front Panel
The Instant GigaDrive’s front panel (shown below) displays the majority of
the drive’s status lights.
Note
: The Reset
Button should only be
used as a last resort.
Pressing this button
will reset the adminis-
trator password.
Instant GigaDrive User Guide.indd
10/6/99, 8:46 AM
4
All manuals and user guides at all-guides.com
