25
Network Logon
To access the Instant GigaDrive, you must correctly logon to the network.
1. Check your Windows logon using Start - Settings - Control Panel -
Network. Ensure that the Primary Network Logon is set to Client for
Microsoft Networks, as shown below. If this is already set, there is no need
to make a change.
2. After your PC boots, Windows will prompt you to logon to the network.
You must logon. If you press ESC, or click Cancel, network resources will
not be available. When you logon, you will need to use a valid User Name
and Password.
• If the Instant GigaDrive Administrator has defi ned users on the GigaDrive,
use the User Name and password supplied there.
• If you use a User Name and password which is not recognized by the
Instant GigaDrive, you can still use it with
guest access rights. By default, this allows
read/write access to the public share, and
allows you to use the printer.
Cha
ng
i
ng
y
o
u
r
I
n
s
t
a
nt
Gi
g
aD
r
iv
e
Pass
wor
d
Once the Instant GigaDrive Administrator has
given you a valid GigaDrive user name, you can
use the following procedure to change your password.
Checking Your Primary
Network Logon
Note:
The admin pass-
word can not be changed
using this method. The
Administrator Interface
must be used to change
the password for the user
“admin”.
Instant GigaDrive User Guide.indd
10/6/99, 8:48 AM
25
All manuals and user guides at all-guides.com