A
Power off your Director (or other audio amplifier).
B
Locate the two-wire speaker cables provided. Each two-wire
cable is color coded with a
red
line on one of the wires, so it is
easy to identify at both ends.
C
Press down on the
red
coded input terminal on the back of the
speaker and insert the speaker wire with the
red
line.
D
Press down on the
black
coded input terminal on the back of
the speaker and insert the speaker wire without a marking.
E
Connect the other end of the speaker wire with the
red
line to
the appropriate
L
(left) or
R
(right)
red
coded output terminal
on the Director.
F
Connect the other end of the speaker wire without any
marking to the
L
(left) or
R
(right)
black
coded output that
pairs up with the terminal used in the previous step.
G
Repeat steps C-F to connect the other speaker.
1 Connecting the Speakers