Linksys AC1200, User Manual, Page: 120 / 123

Encryption Settings
The encryption settings must match the access point’s on the wireless network you wish to join.
•
Windows XP will detect any available wireless networks, and allow you to configure each
network independently.
•
Your network administrator can advise you of the correct settings for each network.
802.1x networks typically use EAP-TLS. This is a dynamic key system, so there is no need
to enter key values.
Enabling Encryption
To enable encryption for a wireless network:
1. Click on the Wireless Networks tab.
2. Select the wireless network from the Available networks list, and click Configure .
3. Select and enter the correct values, as advised by your Network Administrator.
For example, to use EAP-TLS, you would enable Data encryption, and click the checkbox
for the setting The key is provided for me automatically, as shown below.
120