All rights are reserved to Linkcom
classe
DR
classement
LinkDoor
Number
001
date
15/04/05
page
21/31
Parameter 31
r
– Relay number [1-2]
m – Relay mode [for r=1 1-4 , for r=2 1-5]
m=1 Relay mode – Relay will be activated for ss period (used for electrical locks, gate opening etc.)
m=2 camera mode – Relay will be activated on Door Phone lifting up and desactivating by hanging up.
m=3 lighting mode – Relay will be activated on Door Phone lifting up and stay activated even for ss period
after Doorphone hanging up (the line is engaged for this period).
m=4 Relay mode – Relay will be activated when Door Phone button is being presseed and desactivate after
ss period (used for e.g. external bell or horn connections).
m=5 Temporised activation mode – This mode is available only for Relay N°2 .
Relay N° 2 will be activated only after a setting period begening after the activation of Relay N° 1
Parameter 43
g – Relay [1-2] (two commands
in order to hang up the
Doorphone using both
Relayes)
bb –
command for Doorphone
hanging up from phone [2 digits]
It is recommanded to set the
same prefix for Doorphone Relay
activating (
parameter 35
) aa=bb
Parameter 36
r
– Relay number [1-2]
ss – duration of Relay activation
[2 digits 01-99] in second
Parameter 32,33 and 34
r
– Relay number [1-2]
hhhhhh – password for relay activation
when dialed from Direct Call
buttons (C4N and M4N) or
keypad
[2 to 6 digits]
Parameter 38
xx – time between the activation of Relay 1 and starting the
activation of Relay 2
Mode 5 have to be selected for Relay 2 in RELAYS Parameter
m=5 mode setting [2 digits 01-99]
r – Relay number [1-2]
p – Parameter, if p=1 allowed or p=0 prohibited to control the Relay during incoming call.
Allow the control of Relays when the call is made from PABX to Door Phone