LinkBone 8x8 Matrix User Manual Download Page 27

 

 

 

LinkBone Switch User manual, 8x8 Matrix/Dual 8x8 Matrix type 

27 

 

12.

 

  Appendix B - Licenses 

 
The LinkBone Switch firmware includes licenses for the following software components: 
 

Lightweight TCP/IP Stack licensed under the BSD license 
 

Copyright (c) 2001-2004 Swedish Institute of Computer Science. All rights reserved.  
 
Redistribution and use in source and binary forms, with or without modification,  
are permitted provided that the following conditions are met:  
 

1. Redistributions of source code must retain the above copyright notice,  
this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice,  
this list of conditions and the following disclaimer in the documentation  
and/or other materials provided with the distribution.  
3. The name of the author may not be used to endorse or promote products  
derived from this software without specific prior written permission.  
 

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS AND ANY EXPRESS OR IMPLIED  
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT  
SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT  
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN  
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING  
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGE. 
 

Cortex Microcontroller Software Interface Standard licensed under the BSD license. 

 

Copyright (C) 2009 ARM Limited. All rights reserved. 
 
Redistribution and use in source and binary forms, with or without modification,  
are permitted provided that the following conditions are met:  
 

1. Redistributions of source code must retain the above copyright notice,  
this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice,  
this list of conditions and the following disclaimer in the documentation  
and/or other materials provided with the distribution.  
3. The name of the author may not be used to endorse or promote products  
derived from this software without specific prior written permission.  

 
THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR 
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. ARM SHALL NOT, IN ANY 
CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY 
REASON WHATSOEVER. 

Summary of Contents for 8x8 Matrix




























Reviews: