LinkBone Switch User manual, 8x8 Matrix/Dual 8x8 Matrix type
15
Figure 12: LinkBone Switch infrared remote control.
To assign a button from the remote control to the current configuration of port switches select
Assign RC5 code
option from menu. In the next step press the remote control button to be
programmed pointing at the RC sensor. After the successful decode of RC5 code the message will be
displayed on the screen with detected code number (figure 13). To return to main screen press
Back
to main screen
button. Pressing
Back to last menu
button returns to IR Remote Control menu. If
user presses the assigned remote control button in the future the switch will change its statstate to
programmed value. The switch configuration includes port connection setup and the switching
mode.
Figure 13: Message about successful assignment of RC5 code.
To delete assigned RC5 configuration form device memory select
Delete RC5 code
option.
Then pointing with the remote control at the RC sensor press the button to be deleted. After
successful decode of button RC5 code a confirmation message will be displayed (figure 14). To
delete the code select the
Accept
button. The device will no longer change state after receiving the
deleted RC5 code configuration. The remote control button can be assigned to different
configuration in the future.