LL-RLP-20 Datasheet
www.link-labs.com
Information contained in this document is subject to change without notification
8
Figure 2 : Trace Antenna Reference Design
If the user desires only to operate the module with an external antenna, it is possible to separate
the trace antenna. The module’s PCB is pre-scored along the line between the module and the
trace antenna for this purpose. To separate the trace antenna, use a sharp blade to cut along
the score-line, on both the top and bottom sides of the board. Then gently flex the antenna until
it separates. If the antenna does not separate readily, continue to cut the score-line until it can
be removed without applying excessive force. Link Labs is not responsible for damage caused
to the module during this procedure.
