Linhai 2005 ATV 260, Service Manual

Page: 30 / 341

CHAPTER 2 MAINTENANCE
ATV SERVICE MANUA 07.0
CHAPTER 2 MAINTENANCE PAGE. 2- 15
DRUM BRAKE FOR ATV 50-150
The front brakes are located on the right
handlebar. and are operated by the right
hand. The front brakes are mechanical drum
type brakes which are activated by one lever
only.
Brake shoes
z
The standard thickness of lining is
5/32”(4mm)
z
Shoes should be changed when friction
material (lining) is worn to 2.5 mm.(a)
z
Replace the brake shoes as a set if either
is worn to the limit.
Brake drum
z
The standard brake drum inside diameter
is 110mm, the limit is 110.5mm.
z
Measure the brake drum inside
diameter(a)
Drum Brake
Checking
Although the front brake has been adjusted at
the factory, the brake should be checked for
proper operation. The mechanical brake must
be maintained to be fully functional.
1. With the engine off, apply the right hand
brake lever and attempt to move the ATV.
2. If the both front wheels are locked, it is
adjusted properly.
3. If the wheels or one wheel are/is not
locked, it must be adjusted.
Adjusting
To adjust (set up) the mechanical drum brake,
use the following procedure.
1. Loosen the jam nuts of the
adjuster on the right hand of
right and left brake cable.
2. Turn the both adjusters keep
NOTE: Replace the brake shoes as a set either is
worn to the limit.