Linhai 2005 ATV 260, Service Manual

Page: 247 / 341

CHAPTER 5 FINAL DRIVE
ATV SERVICE MANUAL 07.0
CHAPTER 5 FINAL DRIVE. 5- 15
5.12 REAR AXLE BEARING
REMOVAL
1. Remove the axle tube from the machine.
2. Remove outer axle seal and discard
3. Remove outer bearing and spacer.
4. Remove inner bearing retaining ring and
inner bearing.
5.13 REAR AXLE BEARING INSTALLATION
1. Clean bearing surface on axle tube and
install new bearing (s), retaining ring and
seals reversing steps of rear axle bearing
removal..
2. Torque brake caliper, rear hub nut, and
rear wheel nuts to specifications.
5.14 REAR GEARCASE DISASSEMBLY
1. Drain and properly dispose of used oil.
2. Remove bolts and output shaft cover.
3. Remove ring gear assembly from the act
put cover.
4. Remove ring gear bearing shim from the
cover and retain for re-assembly.
5. Remove and discard the output cover
seal and O- ring.
6. Remove input cover and O- ring.
Remove pinion shaft assembly. Inspect
pinion gear for chipped, broken or missing
teeth .Replace assembly if necessary.