8
dc2259af
DEMO MANUAL DC2259A
OPERATING THE CONTROL SCREEN
Datalog Mode is enabled when a maroon box appears to
the left of the START CONTINUOUS READ CELLS com-
mand button and the red box label changes from OFF to
DATALOG OFF. Datalog Mode is disabled when the maroon
box disappears and the red box label reverts to OFF.
NOTE:
The *.csv filenames are based on the time
created and are stored by default into the “C:\Data-
log6804_6811\” folder.
More details are in the file “AboutCurrentVersion.txt” inside
the GUI’s installation folder (normally “C:\Program Files\
LTC\MultiCellBatteryMonitor\LTC6804”).
2. Click on the START CONTINUOUS READ CELLS com-
mand button to start datalogging onto a new CSV file.
Elapsed Time = Total time of Datalog from start to finish.
Total Data Points = Total data points of Datalog from
start to finish. Refresh = Time in seconds (S) between
each Read Cells command; also known as Sample or
Update Rate.
3. Click on the STOP CONTINUOUS READ CELLS command
button to stop datalogging and close the CSV file.
5. View the CSV file in a compatible spreadsheet software
program such as MS Excel.
SOFTWARE ADJUSTMENTS
4. The CSV file is ready to view. Go to “C:\Datalog6811\”
folder and open file.
The GUI program can control up to ten boards on a stack.
1. Select the number of boards on the stack by sliding the track
bar up or down; located at the bottom left of the screen.
