QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1022
MAIN/CAM LED CONTROLLER
LTC3210-1
2
Figure 1. Proper Measurement Equipment Setup for DC1022A
USING THE LTC3210-1 QUICKEVAL SOFTWARE
The program provides brightness controls for
the MAIN and CAM LEDs. The
UPDATE
but-
ton updates the PIC controller and the LED
displays to the current settings on the
LTC3210-1 demo control window. The
FLASH
button flashes the CAM LED from the ENCT
(Torch) setting to the ENCF (Flash) setting for
the time selected in the FLASH TIME drop-
down window. The
FLASH TIME
drop-down
window allows the user to select the flash time
from 50ms to 1000ms in various increments.
The
GRADATION Cycle
button briefly illus-
trates how the LTC3210-1 may increment and
decrement the displays. The
LEDS OFF
but-
ton resets all LEDs to zero and stops the gra-
dation cycle.
VIEW LTC3210-1 PRODUCT PAGE Button –
This button opens an internet browser and
searches the Linear Technology Corporation
web site for information on the LTC3210-1
when an internet connection is available.
ENM Control –
This vertical slide control ad-
justs the MAIN display from 0 to 20mA in 64
steps. This is accomplished by clicking on the
up or down arrows to change it by one LSB,
