8
dc1605bf
DEMO MANUAL DC1605B
Quick start proceDure
The following procedure describes how to set up a DC1605B
demo system.
1. Download and install the LTpowerPlay GUI:
www.linear.
com/ltpowerplay
2. Remove the board from the ESD protective bag and
place it on a level surface. Connect the DC1613 I
2
C/
SMBus/PMBus controller to the DC1605B board using
the 12-pin ribbon cable.
3. Plug the USB-to-I
2
C/SMBus/PMBus Controller into a
USB port on your PC. The board should power up with
+5V and +3.3V
OUT
LEDs illuminated green. The GPIO
and CMP LEDs will illuminate blue.
Figure 4. Connecting DC1605B Board and the DC1613 USB to I
2
C/SMBus/PMBus Controller
