3.2.13 DSP 2 Version
Shows the current DSP 2 version.
3.2.14 DSP 2 Tx Errors
Shows the number of transmit errors between micro and DSP 1 and the error codes.
Moving the menu knob to the right resets the meter.
3.2.15 DSP 2 Rx Errors
Shows the number of receive errors between micro and DSP 1 and the error codes.
Moving the menu knob to the right resets the meter.
3.2.16 AES In Detect
Shows the presence of an AES carrier on any of the 8 audio channels.
3.3 Setup Menu
Entering the setup menu gives you access to several sub-menus, including the
Presets,
I/O, Communication,
and
System
menus.
Moving the menu knob down one step from the main Setup Menu takes you to the these
four sub-menus. Moving the menu knob left or right allows you to scroll between them.
Once you’ve entered one of the sub-menus, moving the menu knob up or down
navigates through the various functions of each.
Presets and processing are discussed in more detail in Chapter 4.
3.4 Presets Menu
3.4.1 User Preset
Shows the current (active) preset. Turning the menu knob scrolls through all available
factory and user presets. An asterisk (*) appears in the display as soon as you move
away from the currently employed preset. To put the preset on the air, move the menu
knob to the right.
Moving the menu knob down from the User Preset menu provides access to the Input
AGC, Multiband AGC, Multiband levels, Final Stage level, and the Preset Name editor.
Please see Chapter 4 for a complete explanation of the processing menus.
3.5 I/O Menu
The Input/Output menu is where input and output audio are selected to interface with the
loudness control (processing) engine.
3.5.1 Master Bypass
When enabled, de-energizes the audio and SDI relays for a hard bypass. This will
create a brief interruption of these signals, and is a feature primarily designed for
troubleshooting.
#:?62C4@FDE:4)& =:E66E2:=65&A6C2E:@?2?5$6?FD
