3.1 Main Menu (Signal Status Meters)
3.1.1 Audio Input/Output Meters and LKFS Display
Shows input and output audio levels on the left and right channels, and the current
loudness LKFS loudness measurements.
Figure 3-2
Input/Output Meters and LKFS Display
3.1.2 AGC/Processing Meters
Shows the amount of gain expansion or reduction of the wideband input AGC (W) and
each band of the multiband AGC’s (1-5). The stationary horizontal line in each band
represents 0dB - the center of the meter’s range. Meters above this line indicate
expansion; meters below it indicate compression (gain reduction). More downward
excursion of the meters represents more gain reduction is being applied.
Figure 3-3
Processing Meters
3.1.3 GPI Status Display
Shows the current status of each of the four General Purpose Inputs, plus the current
(active) preset.
Figure 3-4
GPI Status Display
3.1.4 GPO Status Display
Shows the current status of each of the four General Purpose outputs.
#:?62C4@FDE:4)& =:E66E2:=65&A6C2E:@?2?5$6?FD
