2.3.7 Power
Connect the supplied IEC power cord to the internal power supply, and the (optional)
external 12VDC power supply to the Backup In connection.
NOTE: If using an alternate 12VDC power supply, it MUST be filtered
and regulated and have an output of +12VDC +/-5%. Any damage caused
by use of power supplies not provided by Linear Acoustic will not be
covered by the warranty.
2.4 Quick Setup Notes
The Linear Acoustic AERO.lite is configured at the factory and arrives ready to go on the
air after making the proper input and output connections and establishing the proper I/O
and clock sync settings.
?
Apply audio to the SDI, AES, AES Reference, or Analog inputs as appropriate for
your individual facilities.
?
In the Setup->I/O menu, make sure the Input source corresponds to the type of
input employed on the rear panel.
?
While in the Setup->I/O menu, be sure to choose the proper clock reference for
your application.
?
Processed audio will be available on all audio outputs.
The best way to learn the AERO.lite is to explore its different settings with audio applied
and monitored. There are several factory presets to support many different applications
and tastes. Some presets may not sound much different at first, but will perform
differently depending on program content.
NOTE: For best audio quality, the AERO.lite should be the only
processor in line with station audio. Please make sure to remove any
legacy processing - especially anything that might be left over from
previous analog transmission operations - it will impair the performance of
the AERO.lite. We suggest checking station documentation and physical
installations to make sure the old gear has been removed.
#:?62C4@FDE:4)& =:E6@??64E:@?D2?5(F:4<*6EFA
