40
•
Camera Operation
Linea CLHS Series Camera
User Setting
The command
User Set Save
saves the current settings to non-volatile memory as a
User Set
.
The camera automatically restores the last saved user settings when it powers up.
To restore the last saved user settings, select the
User Set
parameter you want to restore and
then select the
User Set Load
parameter.
Factory Settings
The factory setting is the camera settings that were shipped with the camera and which loaded
during the camera’s first power-up. To load or restore the original factory settings, at any time,
select the
Factory Setting
parameter and then select the
User Set Load
parameter.
Note: By default, the user settings are set to the factory settings.
Camera Firmware Updates
The user can upload new firmware using the
File Access Control
features via Sapera CamExpert.
To update the camera firmware several files must be updated. Files include the following:
Type
File
Device Firmware
Microcode (.hex file)
XML
XML file
Miscellaneous
FPGA Code (.bin file)
CCI (.hex file)
After all files have been transferred to the camera (the order is not relevant), reboot or reset the
camera and restart CamExpert to verify the file versions displayed in the Camera Information
category.
Warning!
The camera firmware file versions must all be compatible or the
camera risks becoming inoperable.
Only after all required files are
uploaded to the camera can the camera be reset or rebooted to
activate the new firmware.
Before updating any firmware files verify that the file versions are correct. If
in doubt, contact your Teledyne DALSA representative if you have any
questions before proceeding.