18
NSTALLATION
I
The installation must be
qualified
carried out by a suitably
person, in accordance with the current
version of the following.
/
1
tions
Before connecting the appliance, make sure that the supply voltage
plate corresponds with your mains supply
oltage.
o
This appliance should be wired into a 15A double pole switched
n and placed in
an easily accessible position adjacent to the appliance. The spur
hange the oven power cord, the earthing
(yellow/green) conductor must always be 10 mm longer than the
en to ensure that the temperature of the mains
supply cable does not exceed 50°C.
d, then it must be replaced
by an appropriate replacement which can be obtained from the
NZS 3000: 2007 Wiring Regulations
0 Electricity Safety Regula
o
AS
o
20
Electrical connection
marked on the rating
v
WARNING: THIS APPLIANCE MUST BE EARTHED.
fused spur outlet, having 3 mm contact separatio
outlet must still be accessible even when your oven is located in
its housing.
o
To connect the oven power cord, loosen and remove the cover
on the terminal block, in order to gain access to the contacts
inside. Make the connection, securing the cord in place with the
cable clamp provided and then immediately close the terminal
block cover again.
o
If you have to c
line conductors.
o
Care must be tak
o
If the mains supply cable is damage
Spares Department.
Downloaded from
www.Manualslib.com
manuals search engine