DO7033
PARTS
1. Cutting unit
2. Cutting length fine adjustment
3. Charging level display LED
4. On/off switch
5.Charging station/holder
6. Cutting length attachments
7. Thinning attachment
SAFETY INFORMATION
• Read through these instructions carefully before switching the device on.
To avoid a potentially deadly electric shock and/or fire, please observe the following:
Do not use the device near filled bathtubs or sinks or near other containers filled with
liquids.
• When finished using the device or for cleaning, pull out the mains plug.
• Do not use the device while bathing.
• Never immerse the device or the cable with plug-in mains adapter in water or other
liquids.
• If the device should fall into water, be absolutely sure to pull the mains adapter out
of the socket with earth contact before reaching into the water.
• Never hold the mains adapter if your hands are wet, particularly if you want to plug
it into the socket with earth contact or unplug it again.
• Hold the mains adapter at the case when you pull it out of the socket with earth
contact.
• Installation of a residual current circuit breaker with a rated release current of not
more than 30 mA offers additional protection against electric shock.
Have the installation performed by a trained electrician only.
Use only the original mains adapter included with the device for mains operation.
• Connect the mains adapter only to an easily accessible socket with earth contact.
• To avoid excessive heating, do not cover up the mains adapter.
• Check the mains adapter and the hair/beard trimmer regularly for any mechanical
defects.
• Replace any defective parts with an original part (specialist shop), but never attempt
to repair a defective device yourself.
• Have repairs carried out only by a speciality retailer or by our Service Centre.
• Keep the hair/beard trimmer and mains adapter away from children, because children
are not always able to judge hazards correctly.
• Make sure that the cable does not get caught in cupboard doors or pulled across hot
surfaces.
Otherwise the cable insulation could be damaged.
Risk of electric shock!
To avoid injury, observe the following:
1
2
3
4
5
6
6
6
6
6
7
18
