Page | 7
OPERATION GUIDELINES
INSTRUCTIONS
LINE2design, Inc. Battery Powered Wheelchair Stair Climber - Yellow
Item # 70019-Y-BAT
Please keep instructions for future reference.
Go to YouTube to view an instructional demonstration
https://www.youtube.com/watch?v=SGWTju6liYI
Operator trainees need to:
o
Read and understand this manual.
o
Be trained on the use of the chair.
o
Practice with the chair
before
using it with a patient.
o
NEVER use the chair with untrained operators.
Operators using the chair need: a working knowledge of emergency patient-handling procedures, and the ability
to assist the patient.
The LINE2design Battery Powered Wheelchair Stair Climber-70019-Y may be used with one trained operator;
however, we strongly recommend using a second operator to assist.
Always use both rear wheel brakes during patient transfer in and out of the chair.
Always use seat restraint strap to secure the patient in the Battery Powered Wheelchair Stair Climber prior to
transporting patient. An unrestrained person may fall and be injured.
Always double check safety restraint strap prior to transporting patient.
Do not attempt to transport patient loads greater than what you can safely handle.
Always advise the patient before you move the chair, ascend or descend stairs.
Always stay with the patient and keep control of the chair at all times.
To avoid tipping, do not apply a wheel lock when the Battery Powered Wheelchair Stair Climber is in use or
when moving.
Always insure that the tracking system is locked into place before transporting a patient.
Avoid getting dirt or other debris inside the tracks.
The Battery Powered Wheelchair Stair Climber may not work properly on all stair surfaces and in all weather
conditions. You may encounter varying degrees of resistance. Water, ice or debris on the stairs can affect the
operator’s footing and proper operation of the Battery Powered Wheelchair Stair Climber.
Always make sure the path is clear or use an alternate route.
DO NOT modify the Battery Powered Wheelchair Stair Climber; only use the chair as built and assembled by
LINE2design.
After each use ensure the battery is adequately charged and ready for the next transport.
Before storing always turn power to OFF position on control panel.
Turn the key on battery to the OFF position.
Before and after each use ensure the Battery Powered Wheelchair Stair Climber is working properly, in good
condition and free from any defects.
