- 6 -
This section provides the information on how to install the drivers of RAID Native
SATA-150 4Ports PCI Host Adapter for the operating systems:
New & Existing Windows 98/98 SE
New & Existing Windows ME
New & Existing Windows NT 4.0
New & Existing Windows 2000
New & Existing Windows XP
4.1. Windows 98/98SE Driver Installation
For New Windows 98/98 SE Systems (Fresh Installation)
1. After the
SATA RAID PCI Host Adapter
and attached drives are configured,
follow Microsoft procedures to install Windows accordingly.
2. Once Windows has been installed, double click
My Computer/Control
Panel/System
, then click
Device Manager
.
3. Double click
Other Devices
then
PCI RAID Controller
.
4. Click
Driver
tab, then
Update Driver
.
5. Insert the Driver CD and click
Next
.
6. Select
Search for a better driver than the one
...option and click
Next
.
7. Check
Specify a location,
uncheck the other boxes, type in
E:\
(If your
CD-ROM/DVD is
E
:\)
and click
Browse
.
8. Points specify a location, example
E
:\
SATA Raid_4Port\Sil3114\Win98_me
_
2000_
xp_nt4.0
, click
OK
and then
Next
.
9.Click
Next
and then
Finish
.
10. Remove the Driver CD and click
Yes
to restart Windows to complete driver
installation.
For Existing Windows 98/98 SE Systems
1. After the
SATA RAID PCI Host Adapter
and attached drives are configured,
boot up Windows.
2. At the
Add New Hardware Wizard
, click
Next
.
3. Select
Search for the best driver for your device
option and then click
Next
.
4. Insert the Driver CD, check
Specify a location,
uncheck the other boxes,
and click
Browse
.
5.Points specify a location, example
E
:\
SATA Raid_4Port\Sil3114\Win98_me
_
2000_
xp_nt4.0
, click
OK
and then
Next
.(If your CD-ROM/DVD is
E
:\)
6. Click
Next
and then
Finish
respectively.
