- 10 -
up, click
Yes
. And when the
Hardware Installation
warning pops up, click
Yes
again.
Add Windows XP Driver on Original Booting Device
1. After the
SATA RAID PCI Host Adapter
and attached drives are configured,
boot up Windows.
2. At the
Found New Hardware Wizard
, check
Install from a list or
specific location (Advanced)
, then click
Next
.
3. Insert the Driver CD. Check
Include this location in the search
, uncheck
the other box, type in
E:\
, and click
Browse
.
4. Points specify a location, example
E
:\
SATA Raid_4Port\Sil3114\Win98_me
_
2000_
xp_nt4.0,
click
OK
then
Next
.
5.When a warning message pops up, click
Continue Anyway
, then click
Finish
.
Verification of the Proper Installation for Windows 2000/XP
1. Double click
My Computer/Control Panel/System
.
2. Click
Hardware
then click
Device Manager
.
3. Double click
SCSI and RAID Controllers
, then double click
Silicon Image
Sil 3114 SATARaid Controller
to display driver properties.
4. A message
This device is working properly
is displayed in the dialog box,
the driver has been correctly installed.
2-ST114-01A
