1
1. Introduction
Thank you for purchasing the LINDY KVM OVER IP SWITCH. This device allows operators to
monitor and access their computers from remote locations. The
KVM OVER IP SWITCH
connects to the internet, intranet, LAN or WAN using standard CAT5 or higher cable. The
modular version is installed into the back of a KVM switch directly.
The stand-alone version then uses a KVM cable to connect a local KVM switch or server. It
supports PS/2 as well as USB keyboard/mouse and 15-way VGA type monitor connections.
However please note that when using a USB mouse and keyboard from the local console you
have to use the USB connection to the server/KVM switch too. And when using PS/2 keyboard
and mouse also the PS/2 connection to the server/KVM Switch has to be used.
The KVM OVER IP SWITCH combines convenient digital remote KVM access and control with
integrated system management. It captures, digitizes and compresses the video signal and
transmits it alongside the keyboard and mouse signals, to and from a remote computer. The
KVM OVER IP SWITCH provides a non-intrusive solution for remote access and control.
Remote access and control software runs on its embedded processors only – so there is no
interference with server operation, or impact on network performance.
The KVM OVER IP SWITCH automatically detects the video mode of the console and allows
manual fine tuning for improved video quality.
The KVM OVER IP SWITCH also features remote mass storage support – the unit connects via
a USB connection to the server/KVM switch and allows virtual storage devices located at the
remote users computer to provide data and a virtual drive to the server.
1.1 Features
Remote access of KVM switches or servers via LAN, WAN, or the internet; control your
installation from almost anywhere in the world
KVM (keyboard, video, mouse) access over IP and analogue telephone line (requires
modem)
BIOS level access also for remote computers
256-bit SSL encryption, SSL Certificate Management
No impact on server or network performance
Automatically senses video resolution for best possible screen capture
High-performance mouse tracking and synchronisation
Local mouse suppression
Remote mass storage virtual media feature
Compatible with Windows, Mac OS 10 and Linux Red Hat/Fedora/Knoppix
1.2 Package Contents
KVM OVER IP SWITCH (stand-alone or module version)
Power Adapter, Multi Country for EURO, UK, US, AUS (stand-alone version only)
19” Rack mount kit and set of 4 rubber feet for desktop use (stand-alone version only)
RS-232 Serial cable
USB 2.0 A to Mini B type Cable
3-in-1 KVM Cable, 1m (stand-alone version only)
Software CD including tools and this manual
Printed Quick Start Manuals
3 product labels (incl. 1 spare) with S/N & MAC (module version only)
2
Multiple Servers
2. Hardware Installation
2.1 Operation Overview
The pictures below show the connection options of the KVM OVER IP SWITCH.
The KVM OVER IP SWITCH redirects local keyboard, mouse, and video signals to a remote
administration console. All data is transmitted using the TCP/IP protocol.
Controlling a single computer
The KVM OVER IP SWITCH can be used in a multi administrator and multi-server environment
as well. Attaching one or more KVM OVER IP SWITCH units to a KVM switch matrix allows
multiple server access via a single remote console.
2.2 Connections
2.2.0 KVM over IP Access Module Installation -
Module version only!
Before you install the KVM over IP Access module into the KVM switch ensure the KVM Switch
is switched off and the power supply is unplugged. Proceed to unscrew and remove the small
metal cover on rear of the KVM switch. Carefully slide the module into the slot and secure in
place with the screw previously removed.
Administrator
(Client)
IP Network
IP Access Switch
Server (Host)
KVM Switch
IP Network
Administrator
(Client)
IP
Access
Switch
Controlling multiple computers
via a KVM Switch
OR
