User Manual
English
Receiver
Power LED: This LED will illuminate when the receiver is connected to a power source.
Link LED: The LED will flash quickly to indicate pairing has been successful. This LED will flash slowly to
indicate pairing has been unsuccessful.
Reset Button: Short press to copy the EDID of the display to the source device connection. Press and hold
for 3 seconds to restore the transmitter to default settings.
240VAC: Connect to a 100-240VAC power source using the included AC cable.
HDMI Out: Connect to an HDMI display.
IR In: Connect the IR receiver cable to transmit IR control signals from the display side.
IR Pin Diagram
IR Emitter Signal
Power
NC
IR Signal
Power
Grounding
Summary of Contents for 38225
Page 2: ......