User Manual
English
Specification
▪
Interface Standard: HDMI 1.3
▪
Supported Bandwidth: 6.75Gbps
▪
Maximum Resolution: 1920x1080@60Hz 4:4:4 8bit
▪
HDCP Support: 1.4
▪
EDID Pass Through: Pass-through
▪
Supported Audio: LPCM 2CH
▪
IR Support: 20-60kHz
▪
Transmission Medium: IEC C6
▪
Chipset: ITE
▪
Housing Material: Metal
▪
Operating Temperature: 32°C - 104°C (90°F - 219°F)
▪
Storage Temperature: -4°C - 104°C (25°F - 219°F)
▪
Humidity: 20 -90% RH (non-condensing)
▪
Power Requirements: 100-240VAC 50/60Hz
▪
Power Consumption: Transmitter
– 3.4W, Receiver – 3.5W
▪
Colour: Black
▪
Human body model
— ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connectors
▪
Transmitter Input: HDMI Type A (Female)
▪
Transmitter Output: HDMI Type A (Female), 3.5mm IR (Female), IEC C6 (Male)
▪
Receiver Input: 3.5mm IR (Female), IEC C6 (Male)
▪
Receiver Output: HDMI Type A (Female)
▪
Power: IEC C6 (Male)
Product Diagram
Transmitter
Power LED: This LED will illuminate when transmitter is connected to a power source.
Link LED: The LED will flash quickly to indicate pairing has been successful. This LED will illuminate
intermittently 3 times to indicate pairing has been unsuccessful.
Reset Button: Push for 3 seconds to reset the transmitter to default settings.
240VAC: Connect to a 100-240VAC power source using the included AC cable.
HDMI Out: Connect to a local HDMI display.
HDMI In: Connect to an HDMI source device.
IR Out: Connect the IR emitter cable for control of the HDMI source device and place the IR eye in clear
line of sight of the source device’s IR receiver.
Summary of Contents for 38225
Page 2: ......