background image

CE Statement 

This device complies with the European Regulations for Electromagnetic Compatibility (EMC) of the European Union and 
it is equipped with the CE mark.  This unit has to be used with high quality shielded connection cables. Only if these high 
quality shielded cables are used it can be sure that the EMC compatibility is not adversely influenced. 
 

FCC Statement 

Shielded  cables  must  be  used  with  this  equipment  to  maintain  compliance  with  radio  frequency  energy  emission 
regulations and ensure a suitably high level of immunity to electromagnetic disturbances. 
 

FCC Warning 

This equipment has been tested and found to comply with the limits for a Class  B  Digital device, pursuant to part 15 of 
the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential 
installation.    This  equipment  generates,  uses,  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in 
accordance  with  the  instructions,  may  cause  harmful  interference  to  radio  communications.    However,  there  is  no 
guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna 

 

Increase the separation between the equipment and receiver 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 

 

Consult the dealer or an experienced technician for help 

You  are cautioned  that changes or modifications not  expressly approved by  the party responsible for  compliance could 
void your authority to operate the equipment. 

 

 

 

WEEE (Waste of Electrical and Electronic Equipment),  
Recycling of Electronic Products  

 

In  2006  the  European  Union  introduced  regulations  (WEEE)  for  the  collection  and  recycling  of  all  waste  electrical  and 
electronic  equipment. It is no longer allowable to  simply throw away electrical and electronic equipment. Instead, these 
products must enter the recycling process. 
Each  individual  EU  member  state  has  implemented  the  WEEE  regulations  into  national  law  in  slightly  different  ways. 
Please follow your national law when you want to dispose of any electrical or electronic products. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

LINDY No. 38042 

 
 

www.lindy.com

 
 

March 2009

 

Summary of Contents for 38042






Reviews: