1. Introduction
Thank you for purchasing the LINDY HDMI 4 x 2 Matrix Switch 1.3b with remote
control. This high performance switch offers you the maximum convenience in HDMI
signal distribution when you have multiple HDMI sources and displays to connect
together. The switch features 4 input ports and 2 output ports, any of the inputs can
be sent to either of the outputs. When the HDMI signal is progressed through the
switch it is retimed and level compensated, so that the output is a regenerated HDMI
signal that can travel another 10 metres. The switch can also be cascaded to multiple
levels.
2. Features
•
HDMI 1.3b, HDCP 1.1 and DVI 1.0 compliant
•
Supports 12 bit deep colour on each channel
•
Supports lossless compressed Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio
•
HDMI input is compensated, clock / phase adjusted and jitter eliminated so the
output is a new standard HDMI signal
•
Input source LED indicators
•
Supports a wide range of PC and HDTV resolutions from VGA to UXGA and
480i to 1080p
•
RS-232 control
•
IR remote control (battery included)
3. Operation Control
Front Panel
1.
Remote control sensor
2.
Power switch and LED indicator (LED will illuminate when power is turned on)
3.
Input select indicators:
Press the HDMI out A or B buttons repeatedly to switch to your desired source,
the LED will illuminate to indicate which input source is selected and routed to
the appropriate display. The HDCP & HDMI/DVI LEDs will illuminate when an
HDCP or HDMI/DVI signal is detected on the selected port
4.
HDCP LED: This will illuminate when the input source supports HDCP
5.
HDMI/DVI LED: This will illuminate when the source is HDMI. No LED will
indicate a DVI source
1 2 3 3 4 5
