English Manual
24
the WPS-ZoomPro box takes an IP address assigned to it by the server. When the
WPS-ZoomPro box is connected to a LAN that does not have a DHCP server, the
WPS-ZoomPro box becomes the DHCP server in the network.
< IP Setup>
♦
You can select “obtain IP address automatically” or “Use the following IP
address”
♦
IP Address: The default value is 192.168.100.10.
♦
Subnet Mask: The default value is 255.255.255.0
♦
Default Gateway: The default value is 192.168.100.10
<DHCP Server Setup>
♦
You can select “auto(Enable/Disable DHCP Server” or “Disable”)
♦
Start IP: The start IP address of DHCP Server.
♦
End IP: The end IP address of DHCP Server.
< Wireless Setup>
♦
Region: default value is “Worldwide”.
♦
SSID: SSID string, max. Length is 32 bytes.
♦
Channel: to set fixed channel or Auto. The “Auto” means after power
on WPS-ZoomPro, it will scan all of wireless channel and select clear
one channel automatically.
♦
WEP: you can Disable WEP key or select one of 64bit or 128bit in ASCII
or HEX string.
♦
Key: If WEP is enabled, you have to set key value according to WEP
mode you selected.
< Gatekeeper>
Gatekeeper is designed for ensuring the enterprise network security within
WPS-ZoomPro
box
♦
All Block can block Guest Users(through wireless) to access all office
network(LAN),
♦
All Allow can pass Guest Users(through wireless) to access all office
network
♦
Internet Only can block Guest Users (through wireless) from office
network (LAN) but still reserve internet connection capability.
<Apply >:
press button to select this mode
<Cancel>:
press button to abort action
.
<Back>:
Back to Operating mode main menu
