LTL HABMM
Issue 2.0
Page A1-9
No more than 12 broken horizontal strands in a 600
mm by 600 mm area
No excessive breakage of wicker at belt or step
holes
Flexi Poles
Intact
Cylinder Straps
All present and in good condition
Clasps fully functional
Rope Handles
Check for excessive wear
Manifolds (Rego) or Tema
Hose Connector (if fitted)
Replace fuel hoses after ten years in service
Correctly installed, no overly sharp bends in hoses
No conflict with other equipment
Fuel lines in good condition. No cuts or abrasions.
No bulging or swelling
Hose end fittings in good overall condition, no dents
or corrosion
O-Rings and square rings in good condition.
(replace if necessary)
(Tema) inner and outer "O" rings in good condition
(replace if damaged)
(Tema) ball bearings free and lubricated
(Tema) locking ring functional
Mates to tanks and burner fuel line
Functional test for ease of connection and leaks
Check valve for self seal function
Lubricate with silicone spray
FUEL CYLINDERS
1
2
3
4
5
6
Serial No.
Check valve handle for tightness
Summary of Contents for Racer 56
