background image

 GS-3 IM3000

 

 

Safety Instructions

  

WARNING

Inspecting the System Prior to Operation:

 Always inspect the meter before 

operation. If the meter appears impaired, do not operate the meter and contact a Lindsay Dealer.

CAUTION

Area Lighting:

 The owner shall provide area lighting as may be required.

WARNING

Repairing the Meter: 

In the event that the IM3000 Flowmeter needs to be repaired; disconnect 

the power source, depressurize the system and contact the Lindsay Dealer.

Only a Lindsay Dealer should make necessary repairs to the system.

Ensure that only Genuine Lindsay Parts are used on the system.

WARNING

Lifting Components:

 Extreme care is needed for lifting components during installation/

assembly. Only a Lindsay Dealer using the proper lifting equipment may perform this task.

Use caution when lifting heavy objects. Components weighing in excess of 50 lbs. (22.7 kg.) must be lifted with 

the assistance of another individual or mechanical lifting device.

WARNING

Impaired Safety Protection:

 Do not attempt to operate if protection may be impaired. If the 

equipment appears to have been changed or operates abnormally, protective devices may be impaired. 

Do not attempt to operate and have the equipment serviced by a Lindsay Dealer.

WARNING:

 Wear appropriate PPE (Personal Protective Equipment)

WARNING:

 Ensure that power is turned off/disconnected before removing any protective covers.

WARNING:

 Do not use this product in a manner not specified in this manual.

WARNING

Data Cables: 

Only use the supplied data cables with this meter. Use of any Lindsay non-approved 

cable may damage the equipment and void warranty.

Summary of Contents for GROWSMART IM3000



























Reviews: