P/N 1605606 Rev A (ECN 32937)
12
IM3000 Installation Manual
User Interface
The flowmeter uses a low power consumption dot ma
-
trix LCD rate/ total display. The screen displays two line
of information. The top line shows the total flow accu
-
mulation. The bottom line displays the flow rate.
The meter provides the following three power status
displays. The screen will be blank if there is no power
to the meter.
If there is an external power source, the letter “P” will
display.
For battery power, a little battery icon displays in the
top-left corner of the screen.
The meter continuously monitors battery life. When the
battery power is low, the following warning will display
and the battery cell icon will show an empty battery.
Battery replacement is required at this time.
When the meter detects an empty pipe, the meter will
stop measuring and display the “EP” warning.
No Power
-EP-
Empty Pipe
G T o t a l
G P M R a t e
0.0
G T o t a l
G P M R a t e
Battery Power
00.00
0.0
No Power
-EP-
Empty Pipe
G T o t a l
G P M R a t e
0.0
G T o t a l
G P M R a t e
Battery Power
00.00
0.0
No Power
-EP-
Empty Pipe
G T o t a l
G P M R a t e
0.0
G T o t a l
G P M R a t e
Battery Power
00.00
0.0
No Power
-EP-
Empty Pipe
G T o t a l
G P M R a t e
0.0
G T o t a l
G P M R a t e
Battery Power
00.00
0.0
No Power
-EP-
Empty Pipe
G T o t a l
G P M R a t e
0.0
G T o t a l
G P M R a t e
Battery Power
00.00
0.0
No Power
-EP-
Empty Pipe
G T o t a l
G P M R a t e
0.0
G T o t a l
G P M R a t e
Battery Power
00.00
0.0
