6
4.
General
Instructions,
Measures
and
Safety
Instructions:
When using the device, follow basic
safety instructions stated by the
manufacturer. The cooling device is
designed for flow cooling of beverages
dispensed from kegs. Any other use is
considered impermissible and therefore
dangerous. The supplier is not liable for
damage caused by incorrect use.
DO NOT USE THE DEVICE FOR
PURPOSES
OTHER
THAN
THOSE
STATED BY THE MANUFACTURER!
General safety principles. Observe
the following safety instructions.
The supplier is not liable for damage
caused by activities carried out on this
device without observing the following
instructions!
WARNING:
Children aged 15 or
more and persons with reduced
physical, sensory or mental capabilities
or
insufficient
experience
and
knowledge may only use the device
when supervised or instructed in safe
use of the appliance and familiarised
with potential dangers.
WARNING:
Children must not be
allowed to play with the appliance. Store
all packaging material out of reach of
children (comes with a plastic bag
–
suffocation hazard).
WARNING:
Cleaning
and
maintenance of the appliance on the part of
the user must not be done by unsupervised
children.
WARNING:
Before connecting to main
electrical supply, check that the voltage and
frequency in the mains corresponds to the
data stated on the device.
WARNING:
Always make sure that the
socket you intend to plug the cooler into
meets the specifications on the machine
plate (voltage, frequency, input power).
WARNING:
Before any interference
with the device, such as cleaning or
maintenance, ALWAYS disconnect the
device from power supply: set the
thermostat to "O" position and unplug the
appliance from the socket.
WARNING:
Never place tools or other
object into the fan.
WARNING:
Never touch electrical
components with wet or damp hands.
WARNING:
To ensure the cooling unit
works properly and at full capacity, make
sure air supply to the unit is not obstructed.
WARNING:
Water
temperature
during sanitation must not be higher than
25 °C!
WARNING:
Always make sure the
power socket you intend to plug the cooler
into is accessible, so that the appliance can
be immediately unplugged in case of
emergency.
WARNING:
When unplugging the
device from the socket, grab the plug and
pull it out. Do not under any circumstances
Summary of Contents for VCH 02237 AS-200-us
