LINDR VCH 02237 AS-200-us, Manual

Page: 17 / 28

ˇ
17
16.
How to Work with speed fitings
:
Speed fitings Installation
Grasp the speed fiting and
insert the hose all the way
inside the speed fiting body
(ca. 20 mm). The end of the
hose must be straight, so
that it plugs fully into the
coupling. If the hose will not
go in, moisten the end of the
hose.
Speed fiting Removal
Hold the grey ring tight against
the body of the speed fiting and
pull out the hose.
WARNING
: Hoses must not be pressurised during removal.
WARNING:
If you do not hold the grey ring but pull at the hose,
the rapid coupling will cut even deeper into the hose.