18
20. SPARE PARTS:
When ordering spare parts, always provide the following:
• product type
• production year
• product‘s serial number
• full name of the spare part and its number
21. SANITATION BY WATER:
(Sanitation Adapter)
Connect the sanitation adapter (not included) to water mains using a hose.
WARNING!
Maximum water temperature must not exceed 25 °C.
figure
18 A
figure
18 B
NOTE:
Sanitation adapter is not included. Can be purchased as an accessory for the cooler.
Ordering Components:
ALWAYS USE ORIGINAL COMPONENTS. The manufacturer or supplier bear no responsibility
for non-original components or components not recommended by the manufacturer.
Sanitation Procedure:
Once you have finished a keg, connect the keg coupler to the sanitation adapter the same way as if
you were tapping a keg. Once connected, turn the bar tap lever to open position and keep it open
until clean water flows out of the tap (all beverage residue and partial sediments flush out). For
better sanitation of the cooling device, place cleaning balls into the hose beyond the keg coupler
and use pressurised water to clean out the beverage tubing.
NOTE:
Remember to dismount the tap and remove the cleaning balls.
