12
If everything is in order, check the thermostat settings (in off position). Connect the cooler to
the power mains. Then use the keg coupler to tap the keg, set the desired pressure (1.0-3.4
bar) and use the tap lever to pour out some of the beverage. If the cooler contains remnants of
sanitation solution or water, keep the tap lever in open position until only beverage pours out
of the tap. Set the desired beverage temperature on the thermostat.
13.4 Beverage input for model:
PYGMY 25/K EXCLUSIVE
1koh, PYGMY 25/K EXCLUSIVE 2koh, PYGMY 25/K Exclusive
Green Line 1koh
Beverage input is located at the back of the cooler.
figure
12 B
14. POSITIONING OF THE THERMOSTAT:
14.1 Positioning of the thermostat:
SOUDEK 20 Green Line
Mechanical thermostat is located under the wooden cap on
the back of the cooler.
figure
12 A
14.2 Positioning of the thermostat:
SOUDEK 30/ K, SOUDEK
50 Green Line, SOUDEK 50/ K Green Line, SOUDEK 50/ K profi
Green Line
Mechanical thermostat is located below the tap and a woo-
den cap on the front of the cooler.
figure
12 C
14.3 Positioning of the thermostat:
KONTAKT 55 Green Line,
KONTAKT 55/ K profi Green Line
Mechanical thermostat with a numeric scale 1-7 located on
the front of the cooler.
figure
12 D
14.4 Positioning of the thermostat:
PYGMY 25/K EXCLUSI-
VE 1koh, PYGMY 25/K EXCLUSIVE 2koh, PYGMY 25/K Exclusive
Green Line 1koh
Mechanical thermostat with a numeric scale of 1-7 based
on the back of the cooler.
figure
12E
