User guideline NORTEC sonic
NRSB-09
Issued by: PM Floor Division
10.6.09
Page 2 of 6
Rev.00
NRBS-09
Horizontal forces are only permissible as partial forces of the loading allowed. The loading
specifications refer to the closed raised floor. So do not carry out any transports towards an
open row of panels.
The raised floor panels may only be lifted with a suited lifting device.
The system may only be opened or closed by qualified personnel.
Illustration A
2.1 Taking out of a panel
NORTEC sonic with covered perforation (textile covering)
Place the spike lifter in the centre of the panel
edge with a short distance to the edge of
approximately 5 cm and lift the panel slightly to
loosen it and then remove the lifting device
again.
Then place the spike lifter in the middle of the
panel and lift it vertically.
