Linden L10PDV17, Instruction Manual

Page: 13 / 28

Remote control
Preparation of the Remote Control
Cell data
Using Of Remote Control
Notes on batteries
Buttons of the remote control
The remote control requires on CR2025 type 3V lithium battery, to extend the battery life of
the original battery, a small plastic spacer tab has been inserted between the battery and the
battery terminal. In order to get your remote control working initially,pull the tab from the battery
compartment. Place the remote control on an even surface and insert the supplied button cell
into the remote control as follows.
1. Push the button towards left.
2. Pull the battery loader out.
3. Insert the battery into the receptacle make sure the polarity matches the
marks inside the component.
4. Insert the receptacle into the remote control.
Battery type: 1x CR2025, 3 V
Service life: approximately 1 year (for normal use and room temperature)
If the remote control is not used for a long period of time, please remove the battery from the
compartment.
Do not heat batteries or dispose of them in fires.
Do not dismantle, deform or modify batteries.
Point the remote control towards the sensor window on the main unit when
operating.The remote control works best at a distance less than 5 m and at an
angle of up to 30 degree to the front of the unit. No obstacles may stand in
the way between remote control and infrared sensor and do not place the remote control in
direct sunlight. If the remote control fails to work even when it is operated near the player,
replace the battery.
11