background image

When the playback is in the stop mode, press the USB/CARD button on the remote control or the

5.  During the playback, press the STOP button to stop playback.

3.  The player will scan the disc, and then the playback will start automatically.

Basic operation

Note:

Disc error messages

Note:

Playable discs

Turn on/ off the player

Selecting the different mode (DVD/USB/CARD)

Playing discs

Depending on the discs, some operations may be different or restricted.

Do not put any objects other than disc on the disc tray. Doing so may cause the player to malfunction.

 

unit to select DVD or USB or SD play mode if certain disc or memory devices are connected. When 

a USB mass storage device is simultaneously inserted, the USB device can be recognized.

 

1.   Slide the Power switch on the player to “ON” position to turn on the player. 

2.  Open the disc cover and insert a playable DVD or CD disc, Make sure the label side is facing up, 

     and then close disc cover. 

     If a disc menu appears on the screen, see “Using the disc menu” for details.

4.  If the disc is locked by parental control, you must enter your password (see “SYSTEM SETUP” 

     section for details).

6.  Sliding the Power switch on the player to “OFF” position will turn off the player.

 

This player will play CD, VCD, DVD, CD-R/RW and DVD   R/RW etc. discs.

 Note: If you have trouble with playing a certain disc, remove the disc and try a different one. 

Improper formatted disc will not be played on this player.

 

Slide the Power switch on the right side of the player to “ON” position to turn on the player after

connecting the mains power supply. Slide the Power switch on the player to “OFF” position to turn 

off the player completely.

Note: If the player will not be in use for a long period of time, slide Power switch to the “OFF” 

position and unplug the portable DVD player from the power source.

 

DVD disc production quality may vary and some discs may deviate from the industry standard. 

Some incorrectly formatted discs may still play, however, the playback and operational quality

of the disc may be substandard.

 

If there is a problem with the format of the loaded disc, then the disc cannot be played correctly.

1.   The region code of the disc does not match the player’s region code.

2.  The parental rating level of the disc is higher than the parental rating level setting of the player.

     The player will not play the disc.

3.  Bad/No disc: The player is equipped with automatic disc quality detection software. If the player

     detects a disc that is damaged or has a format problem, it may play the disc at a lower quality or 

     stop playing completely, depending on how serious the damage is. 

 

1. 

 If a “   ” mark appears on the screen when a button is pressed, it means the function is not available

 

    at the moment on the current disc or at the current station.

2. Depending on the conditions of the recording equipment or the CD-R/ RW (or DVD   R/RW, MP3, 

    

Picture CD) disc itself, some discs cannot be played on this player due to the configuration and 

    

characteristics of the disc, or due to the condition of recording and authorized software that was 

    use.

 

±

±

   13

                                                                        

Summary of Contents for L10PDV17





























Reviews: