Linden Group ST-HB56A1X, User Manual

Page: 5 / 16

4
Use Notice
When getting problem at installation, please contact your distributor to install for you.
Don’t repair or open the monitor by yourself.
It may cause a fire or an electric shock. The monitor repair, please ask your distributor.
Protect and correctly use the power cord/ plug.
 Don't heavy press the power cord/ plug, don't step on the power cord/plug.
 Connect the power cord and the monitor, before insert the power plug into the wall outlet.
 Don't operate the monitor with a damaged power cord, otherwise the monitor will be damaged.
Using the extension line precautions
If use the extension line, the current power of the voltage should be equal to the power consumption of the
monitor at least, if the power of the voltage is smaller than the monitor, it will cause the overheated
phenomenon.
If there is thunder or lightning, don’t touch the monitor or the power plug.
This may cause an electric shock.
When remove the power plug from outlet on wall, don't revolve the power cord.
This may cause the power cord damaged. When take off the power plug, please hold the plug, don’t revolve.
Don’t sprinkle any kind of liquid on the monitor.
 If the monitor is sprinkled by any kind of liquid, please be sure to take off the power plug and ask a
qualified service personnel to check the monitor.
 If the monitor’s surface is touched by water, please clean it with a dry and soft cloth immediately.
 Don’t sprinkle volatile liquid on the monitor such as insecticide.
 If the liquid enter the monitor, it may cause the electrical failure.
Don’t insert or take off the power plug with wet hands.
This may cause an electric shock.
If the monitor isn’t in use for a long time, for safety, please take off the power plug.
This may cause breakdown, or it may cause a fire.
If the monitor isn’t in use for a long time, take off the power plug and store it in the proper package. The
original carton and packing should be used, if possible.
Don’t compress on the monitor panel.
This may cause personnel injury or panel damage and break-down.
Don't push or shake the monitor.
This may cause breakdown and the injury.
 If the glass of the monitor panel is broken, liquid crystals may transude. Please don't touch the liquid
crystals.
 If liquid crystals get into your eyes or touch your skin, wash with the clean water and go to a doctor
immediately.