Linde T 16, Operating Instructions Manual

Page: 39 / 53

3
6
0
8
0
4
2
5
1
1
-
0
5
0
4
ATTENTION
Before commencing any work on the electrical
equipment, the battery connector must be
disconnected.
Electrical system: checking the condition
and fastening of electrical cables and con-
nections
- Remove the front cover.
- Check the tightness of the connections, and ensure that
there are no traces of corrosion.
- Check that cable fastenings are secure.
- Check the cables for any areas of chafing. Ensure that
they are properly insulated and fastened.
NOTE
Corroded connections and damaged cables may cause
voltage drops and overheating, which can result in
malfunction.
Maintenance Maintenance every 500 hours
Cleaning the electrical panel
- Disconnect the battery connector.
- Remove the front cover.
- Clean the pulse control panel using compressed air.
NOTE
Protect the electrical panel against moisture. Adjustment
and repair must be carried out only by our representatives .
ATTENTION
Before commencing work on any electrical
component, disconnect the battery connector.
Cleaning and checking contacts for wear
- Disconnect the battery connector.
- Clean the contacts using compressed air, and check
their mechanical integrity.
- Any contacts which show advanced wear or substantial
traces of burning must be replaced.
Always replace the contacts as a complete set.
NOTE
We recommend leaving this operation to your local
representative.
https://www.besttruckmanuals.com/